|
Zipfile of meeting documents and agenda
(extract to a folder then open agenda ExTAG/173/DA) |
|
ExTAG Training Workshop Monday 31st August 2009
Discussion Paper from Mr. Ajaya Maira - Presenter |
|
ExTAG Melbourne Meeting 1st
September 2009 |
|
Agenda Item number |
Document
no. |
Title |
|
|
*ExTAG/176/Inf |
ExTAG Training Workshop Melbourne 2009 - Monday 31st
August 2009 |
|
|
***ExTAG/173C/DA |
Draft Agenda the Eleventh Meeting of the ExTAG to be held In
Melbourne, Australia 1st September 2009 |
|
|
|
|
|
3.1 |
ExTAG/154A/RM |
Confirmed Minutes the Tenth Meeting
of the ExTAG – Paris France |
|
3.2.1 |
EXTAG/157/Inf |
Nominations for consideration as ExTAG Secretary |
|
6.2 |
IECEx OD 003-1 |
Assessment Procedures for IECEx
acceptance of Candidate Accepted Certification Bodies (ExCBs)
and Ex Testing Laboratories (ExTLs) –
Part 1: Appointment and Surveillance of IECEx appointed
Assessors |
|
6.2 |
ExMC/460A/CD |
Revision of Draft OD 003 Part 2:
Procedures for the assessment, surveillance assessment and
reassessment of ExCBs and ExTLs |
| 9.3.2 |
OD 010/Version 1 |
Operational Decision “Guidance
for the Preparation of IECEx Test Reports (ExTRs) by IECEx
Certification Bodies (ExTRs) and the Processing of ExTRs by
Receiving ExCBs” |
| 9.5 |
***ExTAG/169/R |
Activity Report WG3 – OD017 -
Drawing and Documentation Guidance for IEC Ex Certification –
for use by Manufacturers and ExTLS |
| 9.5 |
Ex/OD 017 V3 |
Drawing and Documentation Guidance for IEC
Ex Certification and ExTLS |
| 9.6 |
IECEx
OD 012 |
ExTAG Guide for Application of Uncertainty
of Measurement to conformity for laboratory tests carried out
under the IECEx System |
|
9.8 |
*ExTAG/170/R |
Report from ExTAG WG 06 - IECEx
Rules of Procedure covering testing, or witnessing testing at a
manufacturer’s or user’s facility Draft
OD 024/V03/Toronto |
| 9.8 |
*ExTAG/177/CD |
Draft Operational Document IECEx
OD 024 Version 03/Toronto IECEx Rules of Procedure covering
testing, or witnessing testing at a manufacturer’s or user’s
facility |
| 9.8 |
*ExTAG/178/CD |
Annex A - WITNESSED TESTING SITE
ASSESSMENT CHECKLIST Draft Operational Document IECEx OD 024
Version 03/Toronto |
| 9.10 |
OD 021/V2 |
Guidance document for the Assessment of I.S
systems and equipment |
| 9.12 |
ExTAG/163/CD |
Report from Dr Uwe Klausmeyer, Convenor
ExTAG WG 10, Proficiency Testing |
| 9.13 |
***ExTAG/171/R |
ExTAG WG11 Convenors Report
Material Data |
| 10.1.1 |
DS 2004/006 |
ExTAG Decision Sheets / Procedures for use
of components on end products not covered by an ExTR |
| 10.1.1 |
ExTAG/136/CD |
Revision of ExTAG Decision Sheet DS 2004/006
– What procedures should be followed for manufacturers that are
seeking an ExTR (and subsequent IECEx Certificate of Conformity,
CoC) on an end-product that includes Ex components not covered
by an ExTR and manufactured by another manufacturer? |
| 10.1.1 |
ExTAG/159/CC |
Compilation of Comments received concerning
document- ExTAG/136/CD – revision of ExTAG Decision Sheet DS
2004/006 - ExTAG Decision Sheets / Procedures for use of
components on end products not covered by an ExTR |
| 10.1.1 |
ExTAG/136A/CD |
Revision of ExTAG/136/CD – revision of ExTAG
Decision Sheet DS 2004/006 - ExTAG Decision Sheets / Procedures
for use of components on end products not covered by an ExTR |
| 10.1.1 |
*ExTAG/174/CC |
Compilation of Comments on ExTAG/136A/CD
– revision of ExTAG Decision Sheet DS 2004/006 - ExTAG Decision
Sheets / Procedures for use of components on end products not
covered by an ExTR |
| 10.1.1 |
*ExTAG/136B/CD |
Revision of ExTAG/136A/CD –
revision of ExTAG Decision Sheet DS 2004/006 - ExTAG Decision
Sheets / Procedures for use of components on end products not
covered by an ExTR |
| 10.1.2 |
DS 2006/002 |
Ex equipment where the equipment
includes unspecified IECEx certified components |
| 10.1.2 |
ExTAG/145B/CD |
Revision of ExTAG DS2006/002– To Consider
the Acceptance of Certain Types of Unspecified Ex Certified
Components for Incorporating into Flameproof Ex Equipment |
| 10.1.2 |
*ExTAG/179/CD |
BASEEFA comments on ExTAG/145B/CD
Revision to ExTAG DS2006/002– To Consider the Acceptance of
Certain Types of Unspecified Ex Certified Components for
Incorporating into Flameproof Ex Equipment |
| 10.1.3 |
DS 2003/02 |
ExTAG decisions and
recommendations: Proposal for a procedure to generate, discuss
and finalise them |
| 10.1.3 |
OD 035 Ed.1 |
Operational Document - A
procedure to generate, discuss, report and publish ExTAG
Decision Sheets |
| 10.1.4 |
**ExTAG/130/CD |
Draft Decision Sheet - Totality
of equipment to be suitable for hazardous area installation when
issuing IECEx certificates |
| 10.1.4 |
***ExTAG/130A/CD |
Draft Decision Sheet - Totality
of equipment to be suitable for hazardous area installation when
issuing IECEx certificates |
| 10.1.4 |
**ExTAG/133/CC |
Compilation of Comments received
concerning document: ExTAG/130/CD: –Totality of equipment to be
suitable for hazardous area installation when issuing IECEx
certificates |
| 10.1.4 |
ExTAG/143A/CD |
Updated version of the Initial
response from TC 31 Maintenance Team regarding the IEC Standard
IEC 62013 Caplights and EXTAG documents ExTAG/130/CD and ExTAG/133/CC |
| 10.2.1 |
ExTAG/158/CD |
Draft Decision Sheet – Questionnaire
relating to – Standard IEC 60079-7 Edition 4 clauses 4.2.2.5 and
4.2.3.3 Mechanical Security of Soldered Connections |
| 10.2.1 |
ExTAG/168/CC |
Compilation of Comments ExTAG/158/CD
Draft Decision Sheet – Questionnaire relating to – Standard IEC
60079-7 Edition 4 clauses 4.2.2.5 and 4.2.3.3 Mechanical
Security of Soldered Connections |
| 10.2.2 |
ExTAG/165/CD |
Draft Decision Sheet – Sealing requirements
and terminology of cable glands |
| 10.2.2 |
***ExTAG/175/CC |
Compilation of Comments ExTAG/165/CD Draft Decision Sheet – Sealing requirements
and terminology of cable glands |
| 10.2.3 |
***ExTAG/180/CD |
Draft Decision Sheet -
Ventilation of battery containers |
| 10.3.1 |
ExTAG/166/Inf |
A list of Approved ExTAG Decision Sheets |
| 10.3.2 |
ExMC/161/CD |
Review of IECEx TAG DS pertaining to IEC
60079-11 |
|
10.3.2 |
DS
2004/002
|
ExTAG Decision Sheets /
Electrochemical cells IEC 60079-11: 1999 |
|
10.3.2 |
DS
2004/003
|
ExTAG Decision Sheets
/ Use of temperature coefficient for ambient temperatures above
40°C IEC 60079-11 |
|
10.3.2 |
DS
2004/004
|
ExTAG Decision Sheets
/ Segregation distances where earthed metal separates IS from
Non IS circuits IEC 60079-11 |
|
10.3.3 |
DS 2004/001 |
ExTAG Decision Sheets
/ ExTAG Recommendation Sheets
Additional source of
information related to the application of Ex-Standards |
|
10.3.3 |
DS 2004/005 |
ExTAG Decision Sheets / Non-metallic parts of enclosures |
| 10.4 |
ExTAG/172/CD |
Editions of standards of
incorporated Ex Components and Ex Equipment |
| 10.5 |
ExTAG/164/Inf
|
Scheduling of Surveillance
Assessments + Re-Assessments for the IECEx 02 Certified
Equipment Scheme. |
| 12.1 |
ExTAG/167/Q |
ExTAG Industry Discussion Request – Repair
and rewinding of ‘Ex’ rated motors by Certified Service Provider
under the IECEx Scheme |
| 20 |
ExMC/540/Inf |
IECEx 2010 MEETINGS TO BE HELD
IN BERLIN, GERMANY |
