IECEx Scheme Internet Based “On-Line” Certificate of
Conformity System for Certified Service Facility Scheme - Key Documents
For information on the Certified Ex Equipment Scheme click here
For information on the Conformity Mark Licensing System click here
For information on the Certified Persons Scheme click here
Introduction and Operational Manuals
The IECEx “On-Line” Certificate of Conformity System provides for the issuing of IECEx Certificates of Conformity, covering Service Facilities for the repair and overhaul of equipment for use in Explosive Atmospheres
IECEx Certificates of Conformity are issued by approved IECEx Certification Bodies (ExCBs). An IECEx Certificate of Conformity attests that a Service Facility, described on the Certificate, has been independently assessed and found to have appropriate equipment, competent staff and operate procedures that provide confidence that the repair, overhaul or modification work complies with IECEx requirements, including IEC 60079-19. It also attests that the Service Facility’s site has been audited to verify that the Service Facility’s quality system meets IECEx requirements, specified in IECEx Operational Document OD 014.
The IECEx selected relevant Operational Documents listed below provide detailed information concerning the IECEx “On-Line” Certificate of Conformity System for Service Facilities and the processes for achieving IECEx Certification. Inquiries concerning IECEx Certification may be made direct to any of the IECEx Certification Bodies or the IECEx Secretariat.
-
Document No.Title
-
OD 316-5 Ed. 1.1
IECEx Certified Service Facilities Scheme – Part 5: Repair, overhaul and reclamation of Ex equipment. Assessment procedures for IECEx acceptance of Candidate Certification Bodies (ExCBs) for the purpose of issuing IECEx Certificates to Ex Service Facilities involved in the repair, overhaul and reclamation of Ex equipment. Ed. 1.1
IECEx OD 316 5 Ed1.1 RLV
-
OD 316-4 Ed. 2.0
IECEx Certified Service Facilities Scheme –Part 4: Ex inspection and maintenance Assessment procedures for IECEx acceptance of Candidate Certification Bodies(ExCBs) for the purpose of issuing IECEx Certificates to Ex Service Facilities providing Ex installations related services. Ed. 2.0
IECEx OD 316 4 Ed2.0 RLV
-
OD 316-3 Ed.2.0
IECEx Certified Service Facilities Scheme –
IECEx OD 316 3Ed2.0 RLV
Part 3: Ex installation and initial inspection
Assessment procedures for IECEx acceptance of Candidate Certification Bodies (ExCBs) for the purpose of issuing IECEx Certificates to Ex Service Facilities providing Ex installation and initial inspection service IECEx (Ed. 2.0)
-
OD 316.2 Ed. 2.0
IECEx Certified Service Facilities Scheme –Part 2: Selection of Ex equipment and design of Ex installations Assessment procedures for IECEx acceptance of Candidate Certification Bodies (ExCBs) for the purpose of issuing IECEx Certificates to Ex Service Facilities providing selection of Ex equipment and design of Ex installations related services (Ed. 2.0)
IECEx OD 316 2Ed2.0 RLV
-
OD 315-5 Ed. 1.0
IECEx Certified Service Facilities Scheme –
Translated Version: PT [Portuguese Version]
Part 5: Repair, overhaul and reclamation of Ex equipment
Additional requirements for IECEx Service Facilities involved in the repair, overhaul and reclamation of Ex equipment
-
IECEx Certified Service Facilities Scheme –Part 5: Repair, overhaul and reclamation of Ex equipment
Translated Version: PT [Portuguese Version]
Quality Management System requirements for IECEx Service Facilities involved in the repair, overhaul and reclamation of Ex equipment IECEx (1 MB)
-
IECEx Certified Service Facilities Scheme – Part 4: Ex inspection and maintenance
IECEx OD314 4 Ed2.0 RLV
Quality Management System requirements for IECEx Service Facilities providing Ex installations related services IECEx Ed.2.0
Translated Version:PT [Portugese Version]
-
OD 314-3 Ed. 2.0
IECEx Certified Service Facilities Scheme –Part 3: Ex installation and initial inspection
IECEx OD 314 3Ed2.0 RLV
Quality Management System requirements for IECEx Service Facilities providing Ex installation and initial inspection service IECEx (Ed. 2.0)
Translated Version:PT [Portugese Version Ed.2.0]
-
OD 314-2 Ed. 2.0
IECEx Certified Service Facilities Scheme – Part 2: Selection of Ex equipment and design of Ex installations Quality Management System requirements for IECEx Service Facilities providing selection of Ex equipment and design of Ex installations related services (Ed. 2.0)
IECEx OD 314 2Ed2.0 RLV
Translated Version:PT [Portugese Version]
-
IECEx Certified Service Facilities Scheme –
Part 5: Repair, overhaul and reclamation of Ex equipment
Assessment and Certification of Service Facilities involved in the repair, overhaul and reclamation of Ex equipment – Procedures (1 MB) -
IECEx Certified Service Facilities Scheme – Part 4: Ex inspection and maintenance
IECEx OD313 4 Ed2.0 RLV
Assessment and Certification of Service Facilities providing Ex installations related services – Procedures. Ed. 2.0
-
OD 313-3 Ed. 2.0
IECEx Certified Service Facilities Scheme – Part 3: Ex installation and initial inspection
IECEx OD313 3Ed2.0
Assessment and Certification of Service Facilities providing Ex installation and initial inspection service – Procedures IECEx (Ed. 2.0)
-
OD 313-2 Ed. 2.0
IECEx Certified Service Facilities Scheme – Part 2: Selection of Ex equipment and design of Ex installations Assessment and Certification of Service Facilities providing selection of Ex equipment and design of Ex installations related services – Procedures IECEx (Ed. 2.0)
IECEx OD313 2Ed2.0 RLV
-
OD-011-Part-3-Ed1.3-Jan-2015
Guidance on Use of the IECEx Internet based “On-Line” Certificate of Conformity System
Part 3: Creating IECEx Service Facility Certificates of Conformity CoCs -
OD 011-1
Guidance on Use of the IECEx Internet based "On-Line" Certificate of Conformity System Part 1: General requirements Ed 5.1
-
Guidance for Applications from Service Facilities seeking IECEx Certification, IECEx 03A
Edition 2 January 2017
IECEx 03A Ed2.0 RLV
Translated: PT (Portuguese Version Ed.2 May 2017)
IECEx Services Scheme Presentation
-
IECEx 03-5
IECEx Certified Service Facilities Scheme – Part 5: Repair, overhaul and reclamation of Ex equipment – Rules of Procedure (Ed. 1.2)
Translated Version:PT [Portugese Version Ed.1.2]
IECEx 03 5 Ed1.2 RLV
-
IECEx 03-4
IECEx Certified Service Facilities Scheme – Part 4: Ex inspection and maintenance – Rules of Procedure (Ed. 2.0)
IECEx 03 4 Ed2.0 RLV
Translated Version: PT [Portuguese Version Ed 2.0]
-
IECEx 03-3
IECEx Certified Service Facilities Scheme – Part 3: Ex installation and initial inspection – Rules of Procedure (Ed. 1.1)
IECEx 03 3 Ed1.1 RLV
Translated Version: PT [Portuguese Version Ed 1.1]
-
IECEx 03-2
IECEx Certified Service Facilities Scheme – Part 2: Selection of Ex equipment and design of Ex installations – Rules of Procedure (Ed. 1.1)
IECEx 03 2 Ed1.1 RLV
Translated Version: PT [Portuguese Version Ed 1.1]
-
IECEx 03-0
IECEx Certified Service Facilities Scheme Part 0: General Rules of Procedure
Translated Version: PT [Portuguese Version Ed 1.0]
This publication is directly related to the IECEx Basic Rules (comprising IEC CA 01 and the IECEx Supplement IECEx 01-S) and provides structure for, and a link to subordinate Rules that relate to specific service activities within the IECEx Certified Service Facilities Scheme.(Ed.1.0)